The company attaches importance to the role and training of technical talents, actively introduces foreign technical experience,and through the perfect quality management system certification, production of marketable high and new, sharp products, thus in a variety of fuel, rice, wheat, corn, and other areas of the processing machinery and equipment have domestic advantage.
1. Reasons why the motor of the oil press cannot start normally:
1. The first point is the most common. The operator does not follow the regular operating procedures, which causes the motor to fail to run, accompanied by a buzzing sound.
2. The voltage is abnormal.
3. The bearings and mechanical parts are jammed.
4. The overload operation is too heavy.
5. Whether the line is connected correctly.
6. The motor winding is abnormal. 
2. According to the above reasons that may cause the oil press motor to fail to start normally, investigate and solve it.
1. As an operator, you need to perform normal operations in accordance with the operating mode required by the oil press manufacturer, operate in violation of regulations before shutting down, and stop the work of the oil press when the materials are not completely eliminated, resulting in a large amount of residue left in the cake. Inside the oil press, these residual cakes can easily block the cavity of the oil press, which seriously affects the secondary start-up of the equipment. The start-up of the oil press is affected, and the start-up of the electric motor will also be affected. Therefore, follow the correct shutdown procedure.
2. The failure of the motor of the oil press to start may be due to voltage problems. Shuangxiang oil presses are matched with 380v three-phase electricity.
3. Check whether the bearings and mechanical parts of the oil press motor are stuck. If they are stuck, remove them in time.
4. Overload operation of the oil press motor is also one of the reasons for the abnormal starting of the motor. Control the motor load and use the motor in a safe and standard manner.
5. If the line is incorrectly connected, the motor of the oil press cannot be started normally. Check this out.
6. The abnormal start of the oil press motor may also be caused by the abnormal winding of the motor. This requires disassembly of the motor for inspection or inspection at a professional motor maintenance point.
Copyright © Henan Zhongxing Grain And Oil Machinery Co.,Ltd. All Rights Reserved. Powered by MetInfo
