News Center

Peanut oil production equipment uses mechanical pressure to squeeze out the oil part of the oil crop under high pressure. So as to play the purpose of oil extraction. The peanut oil production equipment squeezes peanut oil, and the pretreated peanut oil enters the press chamber from the hopper. The raw material is continuously pushed inward by the squeezing screw for squeezing.

Under the conditions of high pressure in the press chamber of the peanut oil production equipment, great frictional resistance is generated between the raw material and the snail, and the raw material and the press chamber, which can cause friction between the micro-materials of the raw material and cause relative movement. On the other hand, because the diameter of the root circle of the snail is gradually increased and the pitch is gradually reduced, when the snail is rotated, the thread-strengthened blank can be pushed forward and turned outward, and it is close to the screw thread at the same time. The surface material layer also rotates with the press shaft. In this way, there is relative movement between each embryo particle in the press chamber. The heat generated by the friction realizes the heat required for the operation of the oil extraction process, which helps to promote the thermal denaturation of the protein in the raw material, destroys the colloid, increases the plasticity, and reduces the viscosity, which is easy to precipitate oil. The oil output rate of the peanut oil production equipment is accelerated, so that the oil in the material is squeezed out and flows out from the gaps in the circular row and the gap in the row.

1. The peanut oil production equipment has a compact structure and a small area. It adopts fully enclosed protection and is safe and convenient to operate; this machine is complete with complete sets, can be produced after connecting to electricity, and is easy to operate. It is a must-select product for the oil press industry.

2. The mechanical equipment is relatively complete, the degree of automation is high, and the labor intensity is low. The peanut oil production equipment has a built-in vacuum splitter, and the oil and residue are reasonably separated and the oil quality is pure.

3. High oil output rate: This machine squeezes cleanly at one time, saving labor and time, high oil output rate, and low power. The peanut oil production equipment adopts directional pressure, multi-stage advancement, and one-time squeezing can speed up the oil output rate by 10-30%. .

4. Vacuum filter the residue to ensure the purity of the oil and meet the sanitary and quarantine standards. The machine body of the peanut oil production equipment is made of high-quality wear-resistant steel with stable performance and can work continuously for a long time; the machine watch is made of electrostatic spraying of new materials, which has strong adhesion, grease resistance and high temperature resistance, which is not only beautiful, but also clean and hygienic.

5. The snails are made of military material-chromium 40, which is resistant to high temperatures. The peanut oil production equipment does not deform under high temperature and high pressure environments, has high hardness, and has a service life of 8-10 times that of traditional carbon steel. The cake outlet of the peanut oil production equipment is made of high-carbon steel, which is high-frequency quenched and heat-resistant. It has high hardness, high strength, and good wear resistance. It is suitable for high temperature and high pressure continuous operation, and accelerates the service life and use time of the peanut oil production equipment. It can be as long as several decades.

6. The peanut oil production equipment adopts the principle of multi-stage advancing and gradual pressurization, so that the pressure in the press chamber is increased rapidly, and the oil is fissioned and separated at one time. Then, the infrared temperature control system is used to automatically control the pressing temperature and moisture, so that the oil is directly softened and activated. The oil molecule is stable in pressing, and it is exhausted at one time, which greatly accelerates the oil yield.