News Center

The peanut shelling machine is composed of several parts such as grain rods, grids, concave plates, fans, and specific gravity sorting. It has a simple and compact structure, easy operation, stable performance, safety and reliability. The peanuts are manually fed and fall into the rough grid. Due to the rubbing force between the rotation of the board and the concave plate of the fixed grid, the peanut kernels and shells after peeling and separating the peanut shells fall through the grid at the same time, and then pass through the wind. The wind blows most of the peanut shells out of the machine, and the peanut kernels and a part of the unpeeled peanuts fall into the specific gravity sorting sieve together. After heavy screening, the peanut kernels travel through the separation sieve and flow into the sack through the feed opening. , And the unpeeled peanuts (small fruits) go down from the sieve surface, flow into the elevator through the discharge channel, and then are sent to the fine-grain grid by the elevator for secondary peeling, and then separated by specific gravity. Achieve all peeling. The correct use will make it play better performance, let us take a look at the use of peanut sheller and precautions.

       1. Before use, check whether the fasteners are tightened, whether the rotating part is flexible, and whether there is lubricating oil in each bearing. The peeler should be placed on a stable ground.

　　2. After the motor is started, the rotation of the rotor should be consistent with the direction pointed by the implement. Run idling for a few minutes and observe for abnormal noises. After normal operation, peanuts can be fed evenly.

       3. The peanuts should be fed evenly and in an appropriate amount, without iron filings, stones and other debris to prevent breaking the peanuts and causing mechanical failure. When the peanuts cover the surface of the sieve, the outlet switch can be turned on.

　　 4. Choose a suitable screen according to the size of peanuts. When there are more peanut shells in the peanuts, the motor can be moved down to tighten the fan belt and increase the air flow.

　　 5. When the machine is used for a period of time, when preparing to store the machine, the dust, dirt on the outside and the remaining grains inside should be removed, and the belt should be removed for storage. Clean all parts of the bearings with diesel oil, dry them and apply butter. The machine should be covered and placed in a dry warehouse to avoid sun and rain.

　　6. ​​Ensure that there is sufficient lubricating oil in the transmission parts and bearings, and clean and replace them regularly.