News Center

The oil extraction equipment needs to be maintained after a period of operation, which can extend the use time of the oil extraction equipment and speed up the quality of the oil produced. The following is a detailed analysis of the maintenance of the oil extraction equipment.

How should the oil pressing equipment be maintained?

After working for 50 hours, the oil pressing equipment should be checked for lubrication. There should be no shortage of oil on the gearbox. The inner bearing of the screw shaft adjustment screw should be drawn from the adjustment screw hole to add butter once, and dry grinding should not be avoided. Every lubricated part of the oil pressing equipment should prevent the entry of dust and reduce the entry of other impurities. In addition, the gearbox of the oil pressing equipment should be checked once a year. If it is found to be deteriorated, all the oil should be replaced. When the squeezing capacity of the complete set of oil pressing equipment becomes low or the oil output is abnormal, the squeezing screw shaft should be drawn out, and the wear of the squeezing screw, squeezing strip, cake head, and cake outlet should be checked, and the worn parts should be replaced in time. After each work, the residual cakes in the oil pressing equipment should be removed, and the dust and grease on the oil pressing equipment should be wiped off.

When storing for a long time after the end of the production season, the complete set of oil pressing equipment should be maintained once, and the snails, pressing strips, and cake heads should be disassembled, washed, reloaded and oiled, and placed in a dry place. After each oil squeezing, the screw shaft should be removed to clean the residue, and at the same time, use a dry cloth and a cotton swab to scrub the rotating port to prevent clogging.